To put the surface into Test Mode:<\/p>\n
MC Mix & MC Control:<\/p>\n
– press and hold Bank L, Bank R and Nudge R while you power on the unit.
\n– this will put the unit into test mode.<\/p>\n
What can you test:<\/p>\n
– Faders: move any fader. The adjacent fader should move also, following the moves of the one you are touching.
\n– Touching the Fader Cap will cause the corresponding ‘ON’ button to turn off.
\n– Turning knobs will display the value on the display
\n– Touching the knobs will display ‘Touch’ on the corresponding display
\n– Pressing the knob-tops will display ‘Switch’ on the corresponding display.
\n– Jog \/ Data wheels display values as you turn left or right
\n– Shuttle Ring (MC Transport only) will display positive (right) or negative (left) values. It will display “SHTL MID” at the null position.
\n– Leds \/ Buttons: pressing any button will display its name on the touch screen (MC Control) or on the OLEDs (MC Mix).
\n– Please note that not all buttons have Leds. The following buttons do not have Leds:
\n– Nudge, Bank, Power, and Back (MC Mix & MC Control)
\n– SoftKeys Up\/Down and 12 surface SoftKeys (MC Control only)<\/p>\n
TFT Calibration Mode (MC Control only):<\/p>\n
– Using the above Test mode on the MC Control, touch the TFT screen with your finger. This will begin calibration mode.
\n– Press and hold directly on the cross-hairs until it moves to a new location. Repeat until complete.<\/p>\n
Auto-Test mode: (MC Mix & MC Control only)<\/p>\n
– press and hold the Left surface Shift button, Bank L, Bank R and Nudge R while you power on the unit.
\n– In this mode each fader should glide up and down one fader at a time.<\/p>\n
_____________[Network Config Mode]__________________<\/strong><\/span> Press the Power button, while holding down the PAGE <R> and PAGE <L> keys simultaneously.<\/p>\n <\/strong><\/span><\/p>\n _____________[Euphonix Save Maps]__________________<\/strong><\/span><\/p>\n The user-set files are saved as .xml files on your Mac. These are the settings for your custom assignable soft keys.<\/p>\n The default user-sets are stored here: – These user-sets are updated as part of our installers. This is also the user-set that you can “restore” from the EuControl SoftKey editor.<\/p>\n The Custom user-sets are stored here: – These files are never overwritten by our installers. To move your custom user-set from one workstation to another simply copy the desired file from this location to the same directory on the other workstation. The new user-sets will load next time you launch EuControl.<\/p>\n The structure of the file is as follows:<\/p>\n
\nTo choose a static IP address or set DHCP:<\/p>\n
\n\/library\/application support\/Euphonix\/SQRL\/…<\/p>\n
\n\/library\/application support\/Euphonix\/UserSets\/MC2User\/MC_User_Set_Root\/…<\/p>\n
![\"\"](\"https:\/\/thesounddesign.com\/MIO\/images\/mc-xml.jpg\" "\\"MC")
<\/a><\/p>\n